|
|
Post by tisme on Sept 25, 2014 15:38:57 GMT
Few pics fitting a bottom metal into a GRS stock Old Bottom plastic needs removing  Wood needs removing to open up the mag area. I use a power file.  and a chisel  Then the bottom metal will fit but not deep enough.  This level needs taking down about 3mm  Until it fits flush  Then sand it down a bit and re oil. The rear screw on this one needed to be 1mm shorter to clear the bolt.  |
|
|
|
Post by sako75varminter on Sept 25, 2014 16:07:07 GMT
So your not just a pretty face!!...tidy job Pete...-  ) |
|
|
|
Post by swampdonkey on Sept 25, 2014 16:52:07 GMT
Nice work Pete. What b/m is that ?
|
|
|
|
Post by tisme on Sept 25, 2014 17:19:13 GMT
E bay one, only cost £105 and so far it's as good as the ones nearly twice the price.
|
|
pcal
Plinker
Posts: 17 
|
Post by pcal on Sept 25, 2014 18:21:38 GMT
Nice work! On a side note, how are you finding the Vortex PST? Im thinking of getting the FFP 4-16.
|
|
|
|
Post by sako75varminter on Sept 25, 2014 19:02:59 GMT
Paul
I love mine..but mine is SFP.
|
|
|
|
Post by tisme on Sept 25, 2014 19:29:55 GMT
Nice work! On a side note, how are you finding the Vortex PST? Im thinking of getting the FFP 4-16. It's ok. Dials and tracks nice until you get near the top or bottom then it goes off to the right. The glass could be better but for the price it's ok. I think Sightron has the edge on glass but there cost more. Zero stop is good. 8 out of 10. |
|
pcal
Plinker
Posts: 17
|
Post by pcal on Sept 25, 2014 20:10:13 GMT
Thanks for the info. I think I am going to sell my Sightron and go all out for the 4.5-27 Vortex Razor Gen2. My only reservation is the weight, 1.4Kg!!!!!
|
|
|
|
Post by miliscer on Sept 25, 2014 20:56:57 GMT
Thanks for the info. I think I am going to sell my Sightron and go all out for the 4.5-27 Vortex Razor Gen2. My only reservation is the weight, 1.4Kg!!!!! What sightron is it? Maybe interested. . |
|
bushpig
Rabbiter
Longrange lead!
Posts: 61
|
Post by bushpig on Sept 25, 2014 21:23:02 GMT
Stick with sightron! I've got a sightron s3 6-24x50 and its Fooking magical.Glass is great and it dials in well, what more could you want???
|
|
|
|
Post by tisme on Sept 26, 2014 7:41:11 GMT
Have you had a look through Tiffs IOR and what do you think of it. I'm not sure if I should splash out or not.
|
|
)
