|
Post by tisme on Aug 9, 2015 14:06:32 GMT
I've just annealed some cases and was trying to work out if it was best to resize before or after. It turns out before is much better as once annealed it bumps back much to far. Picture below case bumped back 2 thou from used size Next pic bumped back with same die in same position What do you lot do before or after
|
|
|
Post by NRA-RBL on Aug 9, 2015 15:57:02 GMT
I do it before which is the most common practice, the case will probably bump back more with softer brass as there is less spring back; if you adjust your dies accordingly its not a problem and with a Annealeez machine there is no reason not to anneal after every firing.
|
|