Post by swampdonkey on Sept 16, 2014 10:10:27 GMT
Subsonic.
45gr Vmax
5.3 gr trailboss
Lapua brass
CCI primer
Seated by 5mm
This works in my 22" 1-14" tikka.
Be careful if working DOWN a subsonic load, and start higher, and work down using a chrono and NO moderator until you can confirm that they fly true. You risk a baffle strike and/or stuck bullet otherwise. If in doubt of any shot, check the barrel before taking another shot.
Normal load
50gr Vmax
22gr IMR 4198
Lapua brass
CCI Benchrest primers
Shoots 3/8" happily.
Regards
Pete
www.varmintinguk.co.uk
45gr Vmax
5.3 gr trailboss
Lapua brass
CCI primer
Seated by 5mm
This works in my 22" 1-14" tikka.
Be careful if working DOWN a subsonic load, and start higher, and work down using a chrono and NO moderator until you can confirm that they fly true. You risk a baffle strike and/or stuck bullet otherwise. If in doubt of any shot, check the barrel before taking another shot.
Normal load
50gr Vmax
22gr IMR 4198
Lapua brass
CCI Benchrest primers
Shoots 3/8" happily.
Regards
Pete
www.varmintinguk.co.uk